Muratec MFX-2590 Quick Manual Download Page 46

Page: 46 / 317

Advanced Scan Functions

Advanced Scan Features 2-11

Scanning the Next Document (Next Doc.)

You can transmit or save separate documents scanned in a row as a single set of data.

Since you can scan using both the document glass and the ADF, this is useful for

transmitting / saving a combination of documents such as an invoice and a map together.

Note

The next document settings can be set separately for the ADF and the document glass

(FBS).

Load the document, and press <Scan>.

Press the [Advanced] tab.

Press [Next Document Setting.].

Select [ON], and press [Enter].

If you select [OFF], the next document setting is disabled.

Specify the destination, and press <Start>.

For details on the procedure, refer to “

•

Basic Scanning

”.

(See page 1-2.)

When the loaded documents have been scanned, the message “Set next document” is

•

displayed.

Load the next document to scan.

Summary of Contents for MFX-2590






























































































































































































































































































































Search results

Summary of Contents for MFX-2590

Reviews:

Related manuals for MFX-2590

Brands by name

Popular brands

Muratec MFX-2590, Quick Manual

Search results

Summary of Contents for MFX-2590

Reviews:

Related manuals for MFX-2590

Brands by name

Popular brands