manualshive.com logo in svg

Muratec MFX-2590, Quick Manual, Page: 78 / 317

Share
Download
Muratec MFX-2590 Quick Manual Download Page 78

1

2

Advanced Scan Functions

Scanning Documents Using a TWAIN Box    2-43

Scanning Documents Using a TWAIN Box

You can use application software that supports TWAIN devices to use this product as a 

scanner. The scanned documents are stored in a TWAIN box, and then imported by the 

application software.

Note

Install the TWAIN driver to the computer in advance. For details on installing the 

• 

driver, refer to Chapter 2, “Installing to Windows” in the Printer Guide.

You can also connect the computer and the machine with a USB cable to retrieve 

• 

data.

Storing Documents in a TWAIN Box

Load the document, and press <Scan>.

1 

Press the [Advanced] tab.

2 

Press [TWAIN Box].

3 

Press [Store].

4 

Summary of Contents for MFX-2590






























































































































































































































































































































Reviews:

No comments