manualshive.com logo in svg

Muratec MFX-2590, Quick Manual, Page: 107 / 317

Share
Download
Muratec MFX-2590 Quick Manual Download Page 107

3-22    Basic Faxing

Press [Resolution].

3 

If [Resolution] is not displayed, press the [Advanced] tab and then select [Resolution].

Select the desired resolution, and press [Enter].

4 

Specify the destination, and press <Start>.

5 

For details on specifying the destination, refer to “

• 

Selecting from the Address Book

”. 

(See 

page 5-2.)

If you loaded the document in the ADF, this concludes the procedure.

• 

If you loaded the document on the document glass, load the next document, and press  

• 

[Next Doc]. Press [Tx Start] to start transmission.

Note

The Super Fine mode may not be supported by the destination machine. In this 

• 

case, the optimal resolution will be automatically selected.

The communication time differs according to the selected resolution.

• 

Summary of Contents for MFX-2590






























































































































































































































































































































Reviews:

No comments