Muratec MFX-2590 Quick Manual Download Page 23

Page: 23 / 317

1-14 Basic Scanning

Enter the user name, and press [Enter].

Up to 64 characters can be entered.

•

For details on entering characters, refer to Chapter 1, “Entering Characters” in the

•

Administrator’s Guide.

Press [Password].

Enter the password, and press [Enter].

Up to 28 characters can be entered.

•

For details on entering characters, refer to Chapter 1, “Entering Characters” in the

•

Administrator’s Guide.

Press [Enter].

Repeat steps 4 to 11 to specify all the destinations.

You can also specify e-mail addresses, shared folders, user boxes, and the shared box as

•

destinations.
To confirm a specified destination, press [Location]. For details on confirming destinations,

•

refer to “

Confirming Specified Destinations

”.

(See page 5-17.)

Summary of Contents for MFX-2590






























































































































































































































































































































Search results

Summary of Contents for MFX-2590

Reviews:

Muratec MFX-2590, Quick Manual, Page: 23 / 317

Search results

Summary of Contents for MFX-2590

Reviews: