Muratec MFX-2590 Quick Manual Download Page 106

Page: 106 / 317

1
2

Basic F

ax Functions

Basic Faxing 3-21

Press <Start>.

If you loaded the document in the ADF, this concludes the procedure.

If you loaded the document on the document glass, load the next document, and

press [Next Doc].

Press [Tx Start] to start transmission.

Repeat step 7 to scan all the documents.

To finish scanning, press [Tx Start].

Note

For details on canceling transmission, refer to “

Canceling / Checking Faxes

”.

(See page

3-26.)

Basic Transmission Settings

You can set the resolution and contrast in accordance with the document and its text, and

insert a dial number.

Note

You can also change the default settings, as necessary.

(See page 7-43.)

Setting the Resolution

Set the resolution to scan with according to the document.

•

Normal:

Select to scan a document with normal text.

•

Fine:

Select to scan a document with small text, such as a newspaper.

•

S-Fine:

Select to scan a document with detailed illustrations or fine text.

•

Photo:

Select this to scan photos.

•

Background: Select this to scan while erasing the background (background pattern or color) of the

document.

Load the document, and press <Fax>.

Press the [Address Book] tab or the [Num. keys] tab.

Summary of Contents for MFX-2590






























































































































































































































































































































Search results

Summary of Contents for MFX-2590

Reviews:

Muratec MFX-2590, Quick Manual, Page: 106 / 317

Search results

Summary of Contents for MFX-2590

Reviews: