Muller Elektronik DRILL-Control, Installation And Operating Instructions Manual

Page: 3 / 58

Contents
30283620-02-EN V3.20151130_rev.2 3
Contents
1 For your safety 6
1.1 Basic safety instructions 6
1.2 Intended use 6
1.3 Layout and meaning of warnings 6
1.4 Disposal 7
2 About the on-board integrated display/controller 8
2.1 Functions of the on-board integrated display/controller 8
2.2 System overview 8
2.3 Overview of keys 9
2.4 Information on the nameplate 9
3 About these Operating Instructions 11
3.1 Who is the target user for these Operating Instructions? 11
3.2 Scope of the instructions 11
3.3 Directional information in these instructions 11
3.4 Layout of operating instructions 11
3.5 Layout of references 11
4 Mounting and installation 13
4.1 Installing the on-board integrated display/controller 13
4.2 Installing the sensors on the implement 13
4.2.1 Installing the revolution sensors 14
4.2.2 Installing the fill level sensor 15
4.2.3 Installing the working position sensors 16
4.2.4 Installing the speed sensor 17
5 Basic control principles 19
5.1 Switching on the on-board integrated display/controller 19
5.2 Layout of the work screen 19
6 Configuring the basic settings of the on-board integrated display/controller 21
6.1 Setting the date / time 21
6.2 Setting the brightness 21
6.3 Selecting the language 21
7 Operating the implement on the field 23
7.1 Setting target rate 23
7.2 Performing a calibration 23
7.3 Filling metering cells with seed 24
7.4 Start seeding 24
7.5 Stop seeding 25