Troubleshooting
Alarm messages
11
30283620-02-EN
V3.20151130_rev.2
53
Alarm text
Possible cause
Remedial measure
Procedure is not allowed
while a task is activated in
the ISOBUS-TC application.
A task is activated in the ISOBUS-TC application. Deactivate the task.
Seed flow detected in a row
that is switched off.
The row is defective.
Check the row.
Speed signal from CAN bus
has been lost.
The cable was disconnected.
Check the cable connection.
Error with the reading or
writing of data to the flash
memory or EEPROM.
An error has occurred while the job computer was
starting.
Restart the job computer.
System has been stopped.
Reboot required.
The connection to a slave job computer has been
interrupted.
A download manager has been activated.
Reboot the job computer.
