About these Operating Instructions
Who is the target user for these Operating Instructions?
3
30283620-02-EN
V3.20151130_rev.2
11
About these Operating Instructions
Who is the target user for these Operating Instructions?
These Operating Instructions are intended for operators of seeders equipped with the DRILL-Control
on-board integrated display/controller manufactured by Müller-Elektronik.
Scope of the instructions
These instructions describe all of the functions that can be actuated with the on-board integrated
display/controller. This means that some chapters may not be relevant for the operation of certain
implements.
Directional information in these instructions
All directional information in these instructions, such as "left", "right", "forward", "back", is relative to
the movement direction of the vehicle.
Layout of operating instructions
The operating instructions explain step by step how you can perform certain operations with the
product.
We use the following symbols throughout these Operating Instructions to identify different operating
instructions:
Type of depiction
Meaning
1.
2.
Actions that must be performed in succession.
⇨
Result of the action.
This will happen when you perform an action.
⇨
Result of an operating instruction.
This will happen when you have completed all
steps.
Requirements.
In the event that any requirements have been
specified, these must be met before an action
can be performed.
Layout of references
If any references are given in these Operating Instructions, they will appear as:
Example of a reference: [
3
3.1
3.2
3.3
3.4
3.5
