7
Operating the implement on the field
Using tramline control
28
V3.20151130_rev.2
30283620-02-EN
This is how to select the proper tramline rhythm:
You know the working width of your implement.
You know the working width of your sprayer.
You know which side of your seeder is used to create tramlines and how many tramline
mechanisms your seeder has on each side. [
1.
Decide whether you want to start working on the left or the right field edge.
2.
Perform the following calculation:
Working width of the sprayer:Working width of the seeder
e.g.: 12:3=4; 15:3=5 or 20:3=6.67
⇨
The following results are possible: Even numbers (2; 4; 6; etc.), uneven numbers (3; 5; 7;
etc.) and decimals (1.5; 4.5; 5.33; etc.)
⇨
Depending on the result, you have to select a different tramline rhythm. You can find the
results in the "Results of the calculation" column in the following chapters.
3.
Find out which chapter contains the proper tramline rhythm for you.
⇨
Even numbers - Even tramline rhythms [
⇨
Uneven numbers - Uneven tramline rhythms [
⇨
Decimal numbers - Special tramline rhythms [
4.
Select the table with the proper rhythm numbers in the chapters mentioned in step 3. The tables
can differ depending on the side of the seeder that is used to create the tramlines, the number of
tramline mechanisms on the seeder and the working start.
5.
On the work screen, press:
>
⇨
"
Settings / Tramlines
" screen appears.
6.
Select the proper rhythm number.
OR
Enter an individual tramline rhythm if the rhythm number indicated in the table is "999". [
⇨
You can start working.
Creating an even tramline rhythm
Two even tramline rhythms can be created during one or two passes.
▪ In one pass if the tramlines are created on both sides of the seeder.
▪ In two passes if the tramlines are created on one side of the seeder and a tramline mechanism is
installed on the side.
▪ In one pass if the tramlines are created on one side of the seeder and two tramline mechanisms
are installed on the side.
Procedure
