Configuring the implement equipment
General information on the configuration
9
30283620-02-EN
V3.20151130_rev.2
43
Function icon
Meaning
Starts the screen for the next part of the same type.
Starts the screen for the next part of the same type.
Password entry
Return
Sequence of the configuration
The configuration differs according to the machine type that you are using and the implement
equipment. This section shows a possible sequence for the configuration of a seeder.
You can see which parameters have to be set for the individual configurations in the indicated
chapters.
You have called up the configuration screen.
1.
2.
3.
- Configure the metering units. [
4.
>
5.
- Configure the sections that you have assigned to the rows. [
6.
>
>
>
- Terminate the configuration.
⇨
You have configured the equipment of the implement.
Configuration of individual implement parts
If you want to configure individual implement parts, you can find out how to reach the respective
configuration screen in the chapters on the individual implement parts. For some implement parts,
there are several possible ways. Always only one possible way is mentioned.
9.1.3
Procedure
9.1.4
