9
Configuring the implement equipment
Configuration of the implement
44
V3.20151130_rev.2
30283620-02-EN
Configuration of the implement
For the configuration of the implement, you must set the basic equipment of the implement. The
implement must always be configured first.
"Number of rows" parameter
Enter the number of rows that the implement works with.
Seed and fertilizer are counted separately.
Example: If you have an implement that spreads seed from 8 rows and fertilizer from 8 rows, you
must enter "16".
"Tramline system" parameter
Select whether the implement has a tramline system.
"Bout marker" parameter
Select whether the implement has hydraulically adjustable bout markers.
"Waterhole Mode" parameter
Select whether the implement has a waterhole mode.
Configuration of the hopper
This is how to call up the configuration screen:
1.
On the
"Settings / Implement"
screen, press:
⇨
You can configure the hoppers.
"Upper Level Sensor" parameter
For each hopper, enter which sensor is used as the upper lever sensor. If there is no upper level
sensor mounted on a hopper, select "No".
"Lower Level Sensor" parameter
For each hopper, enter which sensor is used as the lower lever sensor. If there is no lower level
sensor mounted on a hopper, select "No".
Configuration of the metering units
This is how to call up the configuration screen:
9.2
9.2.1
9.2.2
9.2.3
9.2.4
9.3
9.3.1
9.3.2
9.4
Procedure
