MTS Exceed™ 22 Series Product Information
44
Control Panel Operations
Operation
After the equipment performs the clearing action, it enters the main page. You
can set system language or tap a icon on the right to enter the corresponding
operational page.
1.2 Main Unit
Control Page
On the main page, tap Main Unit Control to enter the main unit control page (or
by tapping the left and right arrow icons on other pages). As shown In the figure
below:
Functions of icons on the
Main Unit Control
page are listed below:
[Pendulum Fetch]: Elevate the pendulum to the pre-elevation angle. Tap the
Pendulum Fetch
icon, and the motor drives the pendulum counter-clockwise
until the induction switch is triggered and then releases the pendulum so that the
pendulum hangs on the hanging rod by its own weight. At this point the
pendulum is in the impact position. The pendulum fetching action is completed.
It is equivalent to the
Pendulum Fetch
button on the control panel.
[Pendulum Placement]: Rotate the pendulum that is in hanging state to the
vertical position. Tap the
Pendulum Placement
icon, and the motor drives the
pendulum to rotate clockwise. When the pendulum hem approaches the vertical
position, the motor stops and releases the pendulum. The pendulum placement
action is completed. It is equivalent to the
Pendulum Placement
button on the
control panel.
Summary of Contents for Exceed 22 Series
