OptiSwitch 2400/L3
CLI
Commands
C
HAPTER
5
91
Command port
duplex
{
half|full}
{
ports-group
|all}
Description
Configures port duplex mode. In order to configure the port
duplex mode, the port speed must be set to 10 or 100 and not to
Auto Negotiation mode.
Syntax
Description
half
:
Indicates that port duplex mode is set to half-duplex
operation.
full
:
Indicates that port duplex mode is set to full-duplex
operation.
port-group
Specifies the port in a group for a port in the duplex
mode.
ports-group
:
Specifies the group of ports in port duplex mode.
all
:
Indicates that all ports are in port speed configuration.
Example
OS2400(config)# port duplex full 3.4
port 3.4 duplex set to: FULL
OS2400(config)#
Command
port state {enable|disable}{
ports-group
|all}
Description
Enables or disables a specific group of ports.
Syntax
Description
enable
:
Indicates that port state is set to enabled.
disable
: Indicates that port state is set to disabled.
ports-group
:
Specifies the group of ports in configuration.
all
:
Indicates that all ports are in configuration.
Command route-map
tag
deny|permit
sequence-number
Description
Specifies the parameters for redistributing routes from one routing
protocol into another.
