OptiSwitch 2400/L3
Getting
Started
C
HAPTER
2
20
Configuration Modes
The OptiSwitch-2400/L3 includes several configuration modes that
determine the commands available to a particular subject. The
specific configuration modes enable you to configure the
required components for the router. The configuration modes are
listed below.
{
XE "CLI:configuration modes"
}{
XE "Configuration
modes"
}
■
Global Configuration Mode:
Enables general system
configuration. Enter this mode by typing
configure terminal
from the Privileged mode. The (config)# prompt is displayed.
{
XE "Configuration modes:Global"
}{
XE "Global configuration
mode"
}
■
Interface Configuration Mode:
Interface and protocol-specific
configuration. Enter this mode by typing
interface
from the
Global Configuration mode and entering the interface name.
The (config-if)# prompt is displayed.
{
XE "Configuration
modes:interface"
}{
XE "Interface configuration:mode"
}
■
Router Configuration Mode:
Routing protocol configuration.
Enter the RIP, OSPF or BGP4 configuration modes by typing
router
and the specific protocol.
{
XE "Configuration
modes:router"
}{
XE "Router configuration mode"
}
■
DHCP Configuration Mode:
DHCP configuration. Enter this
mode by typing
dhcp
from the Global Configuration mode.
The (config-dhcp)# prompt is displayed.
{
XE "Configuration
modes:DHCP"
}{
XE "DHCP configuration mode"
}
■
DHCP Relay Configuration Mode:
DHCP relay configuration.
Enter this mode by typing
dhcprelay
from the Global
Configuration mode. The (config-dhcprelay)# prompt is
displayed.
{
XE "Configuration modes:DHCP relay"
}{
XE "DHCP
relay configuration mode"
}
■
DNS Configuration Mode:
Domain Name Server configuration.
Enter this mode by typing
dns
from the Global Configuration
mode. The (config-dns)# prompt is displayed.
{
XE
"Configuration modes:DNS"
}{
XE "DNS configuration mode"
}
■
Route Map Configuration Mode:
Route redistribution
configuration. Enter this mode by typing
route-map
and the
various parameters from the Global Configuration mode. The
(config-route-map)# prompt is displayed.
{
XE "Configuration
modes:route map"
}{
XE "Route map configuration mode"
}
