OptiSwitch 2400/L3
CLI
Commands
C
HAPTER
5
93
Command service
{
advanced-vty|password encryption}
Description
Enables you to set up various services.
Syntax
Description
advanced-vty
:
Indicates that advance mode VTY is enabled.
password-encryption
:
Indicates that encrypted passwords are
enabled.
No Form
no service
:
Disables the specific service.
Command
show arp [res|nres] [
hostname
] [
interface
]
Description
Displays the entries in the ARP table.
Syntax
Description
res
:
Shows only resolved arps.
nres
: Shows only unresolved arps.
hostname
:
Specifies the group of ports in configuration.
interface
:
Specifies the interface in configuration.
Example
OS2400# show arp res
? (10.10.10.10) at 10:10:10:10:10:10 [ether] PERM on vif4093
OS2400#
Command
show dhcprelay configuration
Description
Displays DHCP Relay configuration.
Syntax
Description
This command has no arguments or keywords.
Example
OS2400(config)# show dhcprelay configuration
Listening on interface vif1
Forward to server: 177.180.22.2
dhcprelay - not running
OS2400(config)#
Command
show fib [
address and mask]
Description
Enables FIB configuration.
Syntax
Description
address
:
Specifies the destination host or network IP address.
mask
:
Specifies the destination host or network subnet mask.
Example
OS2400# sh fib
IP MASK PROT NEXT HOP IP NEXT HOP MAC PORT TAG
---------------------------------------------------------
10.0.0.0 24 LOCAL 195.91.136.254 00:20:1A:1E:D6:9F 4.1
192.168.0.0 24 LOCAL 195.91.136.254 00:20:1A:1E:D6:9F 4.1
192.168.1.0 24 LOCAL 195.91.136.254 00:20:1A:1E:D6:9F 4.1
195.91.136.1 32 ARP 08:00:20:12:58:8D 4.1
195.91.136.3 32 ARP 08:00:20:1A:52:BF 4.1
195.91.136.7 32 ARP 00:00:3B:80:17:4F 4.1
End Of FIB Table
