OptiSwitch 2400/L3
CLI
Commands
C
HAPTER
5
115
Command
management {telnet | snmp}
[IP address]
Description
Enables you to allow Telnet and SNMP management through this
interface either from any station or a specific station.
Syntax
Description
telnet
: Species telnet management from the specific interface
selected.
snmp
: Species snmp management from the specific interface
selected.
IP address: Specifies an IP address in the interface
No Form
no management
:
Enables you to
return to the default time
interval.
Example
OSM400(config-if)# management telnet 194.90.137.89
OSM400(config-if)#
Command multicast
Description
Enables you to configure the interface for multicast addressing.
Syntax
Description
This command has no arguments or keywords.
No Form
no multicast
:
Enables you to configure the router for broadcast
addressing.
Example
OS2400(config-if)# multicast
OS2400(config-if)#
Command proxy-arp
Description
Allows you to enable Proxy ARP protocol on the interface.
Syntax
Description
This command has no arguments or keywords.
No Form
no proxy-arp
:
Disables Proxy-ARP on the interface.
Example
OS2400(config-if)# proxy-arp
Proxy ARP is enabled on the interface
OS2400(config-if)#
