OptiSwitch 2400/L3
Getting
Started
C
HAPTER
2
33
Configuring the Banner
The following steps must be completed in order to configure the
banner.
{
XE "Configuration:system entrance password"
}{
XE
"System entrance password"
}
To configure or change the banner:
1
From the enable mode, type
configure
terminal
to begin
configuration.
2
Type
banner
and banner text
{
XE "Primary interface:defining"
}
OS2400(config)#
banner
Engineering_Backbone_Router
3
The next time the device is rebooted the new banner will
appears.
{
XE "Primary interface:defining"
}
Configuring the Location
The following steps must be completed in order to configure the
location.
{
XE "Configuration:system entrance password"
}{
XE
"System entrance password"
}
To configure or change the location:
1
From the enable mode, type
configure
terminal
to begin
configuration.
2
Type
snmp
to enter SNMP configuration mode
{
XE "Primary
interface:defining"
}
OS2400(config)#
snmp
OS2400(config-snmp)
3
Type
location
and the location parameter. Only a single word
is allowed however, underscores can be used.
OS2400(config-snmp)
location
main_building_second_floor
OS2400(config-snmp)
