EM316LNXNM-OT
Module Installation
PN 1275005-100 Rev E6
11
3.5. Fiber Optic Transceivers Care
Optical devices use a variety of cables, connectors, transceivers, and other components that require special
handling care.
Follow all ESD precautions listed at the front of this manual.
3.5.1. Cleaning Fibers
Fiber optic components and cables are very sensitive to dirt, dust, and mishandling, especially in high-
speed networks. Dirty or mistreated fiber may cause errors and degradation of signal quality that affect
network performance or module functionality.
3.5.1.1. Cleaning Supplies
1.
Optical cleaner cartridge
2.
Can of compressed air
Cleaning cartridge
3.5.1.2. Cleaning Procedure
Follow the procedure below to clean optical transceivers before each cable installation.
1. Blow a stream of compressed air on the fiber ends while the caps are in place.
2. Remove the caps, and blow the ends of the fibers again.
3. Follow the cartridge instructions to clean the ends of the fibers.
Fiber Inspection
Contaminated fiber and clean fiber through a scope
