EM316LNXNM-OT
Appendix
PN 1275005-100 Rev E6
149
Command
Description
protocol t-carrier ds3
DS3 (44.736 Mbps)
protocol t-carrier t1
T1 (1.544 Mbps)
protocol t-carrier t1-ami
T1 AMI (1.544 Mbps)
protocol t-carrier t1-b8zs
T1 B8ZS (1.544 Mbps)
protocol t-carrier t3
T3 (44.736 Mbps)
protocol t-carrier t3-b3zs
T3 B3ZS (44.736 Mbps)
protocol telcobus
TelcoBus (77 MHz)
protocol transparent
Transparent
protocol user-defined
User defined
default pump-pwr
Restore pump-pwr to its default state
pump-pwr <0-4294967294>
(no description yet)
quit
Exit current context and go down to previous
context
default redundant-tx-mode
Adjust redundant trunk transmit mode
redundant-tx-mode 1+1
Enable both trunk transmitters
redundant-tx-mode 1:1
Only enable trunk transmitter connected to the
active Rx port on far end
remote
Configure remotely attached device
default rm-chassis
Set remote chassis connectivity information
rm-chassis <0-4294967294>
Set remote chassis connectivity information
default rm-port
Set remote port connectivity information
rm-port <0-4294967294>
Set remote port connectivity information
default rm-slot
Set remote slot connectivity information
rm-slot <0-4294967294>
Set remote slot connectivity information
select-link active
Attempt to make this port active
select-link standby
Attempt to make this port standby
[default|no] sgmii
Set SGMII-PHY mode
show
Show running system information
show attenuation
Display port attenuation setting
show channels
Show channels detected by OSA
show config
Show administrative configuration for this object
show config all
Show administrative configuration for this object
and all of its children
show defaults
Show default configuration for this object
show defaults all
Show default configuration for this object and all
of its children
show digital-diagnostics
Show Digital Diagnostics summary
show dump
Dump machine readable status
show eusm
Show EUSM port info
