EM316LNXNM-OT
Appendix
PN 1275005-100 Rev E6
151
Command
Description
swing high
Set Peak-to-peak Swing Amplification to "high"
swing normal
Set Peak-to-peak Swing Amplification to "normal"
sync
Wait for changes to be flushed to hardware /
display
[default|no] termination
Set port termination
termination 100-ohms
Set to 100 ohms
termination 120-ohms
Set to 120 ohms
termination 75-ohms
Set to 75 ohms
default threshold
Adjust threshold setting
threshold <-2147483647-2147483647
(no description yet)
threshold osnr max <21-60> MAX
Maximum, rising above will generate a trap
threshold osnr min <21-60> MIN
Minimum, dropping below will generate a trap
threshold rx-power max <21-60> MAX
Maximum, rising above will generate a trap
threshold rx-power min <21-60> MIN
Minimum, dropping below will generate a trap
threshold-action <0-4294967294>
Adjust threshold action setting
[default|no] toggle-mode
Enable toggle-mode
traffic-gen action start
Start traffic generation
traffic-gen action stop
Stop traffic generation
default traffic-gen all
(no description yet)
default traffic-gen da
Egress bytes 0-5 (random, fixed, incrementing)
traffic-gen da fixed WORD
Specify fixed destination address
traffic-gen da increment WORD
Destination address is incremented starting with
specified address
traffic-gen da random
Destination address is randomly selected
default traffic-gen frame-count
Frame count (fixed, continuous)
traffic-gen frame-count continuous
Specify continuous traffic generation
traffic-gen frame-count fixed
<1-4294967294>
Specify fixed frame count
default traffic-gen frame-size
Frame size for fixed. Interpreted as mask for
random
traffic-gen frame-size fixed
<64-9600>
Specify fixed frame size
traffic-gen frame-size random
<64-9600>
Frame size is randomly selected
default traffic-gen inter-packet-
gap
IPG (bytes)--controls amount of traffic
traffic-gen inter-packet-gap
<12-134217727>
IPG (bytes)--controls amount of traffic
traffic-gen load LOAD
Set traffic-gen load
default traffic-gen pattern
Data pattern (random, fixed)
