EM316LNXNM-OT
Appendix
PN 1275005-100 Rev E6
143
Command
Description
egress-tag-action strip
Remove outer VLAN tag (if any) from egress
frames
end
End current context and go down to initial
command context
[default|no] equalization
Disable Input Equalization
equalization high
Set Input Equalization to "high"
equalization low
Set Input Equalization to "low"
equalization medium
Set Input Equalization to "medium"
default error-select
Select type of error to monitor
error-select bpv-exz
(no description yet)
error-select cv-exz
(no description yet)
error-select prbs
(no description yet)
exit
Exit current context and go down to previous
context
[default|no] fiber-auto-neg
Enable Fiber Auto-Negotiation state on line side of
RJ45 port
[default|no] fiber-mode
Enable Set RJ45 port to work with fiber port on its
line side
default fiber-speed
Restore Fiber Speed on line side of RJ45 port to
default setting
fiber-speed 100
Set Fiber Speed on line side of RJ45 port to "100"
fiber-speed 1000
Set Fiber Speed on line side of RJ45 port to "1000"
[default|no] flow-control
Enable Flow Control
default flow-control receive
Adjust port flow control token reception
flow-control receive comply
Obey received FC tokens
flow-control receive drop
Drop received FC tokens
flow-control receive passthru
Ignore received FC tokens, but relay them to
outbound port
[default|no] flow-control send
Enable transmission of FC tokens
flush
Wait for changes to be flushed to hardware
default ingress-tag-action
Restore ingress-tag-action to its default state
ingress-tag-action add
Add outer VLAN tag to egress frames; define
VLAN id and priority
ingress-tag-action retain
(no description yet)
ingress-tag-action strip
Remove outer VLAN tag (if any) from egress
frames
lga start interval <10-86400>
(no description yet)
lga stop
Stop Loss Gain Analysis
[default|no] lin
Enable LIN
[default|no] link-match
Enable link match mode
