EM316LNXNM-OT
Appendix
PN 1275005-100 Rev E6
142
Command
Description
[no] auto-neg-adv full
Advertise full duplex only for all speeds
[no] auto-neg-adv half
Advertise half duplex only for all speeds
auto-neg-adv hex WORD
Advertise using hex format (see MIB descr. for
help)
default auto-neg-wait
Set the number of seconds a port should auto-
negotiate before deciding a link is down
auto-neg-wait <1-254>
Set the number of seconds a port should auto-
negotiate before deciding a link is down
[default|no] auto-negotiation
Enable auto-negotiation
default cable-len
Adjust the expected maximum length cable that
will be attached this port
cable-len 133
Set to 0-133 feet
cable-len 266
Set to 134-266 feet
cable-len 399
Set to 267-399 feet
cable-len 533
Set to 400-533 feet
cable-len 655
Set to 534-655 feet
cable-len long-haul
(no description yet)
cable-len short-haul
(no description yet)
cable-test
Test copper user cable for opens/shorts/impedance
problems
chassis C
A chassis location
chassis NAME
Configure a chassis
clear-counters
Clear counters for this port
[default|no] de-emphasis
Enable Output De-emphasis
de-emphasis 0
Set Output De-emphasis to "0"
de-emphasis 2
Set Output De-emphasis to "2"
de-emphasis 4
Set Output De-emphasis to "4"
de-emphasis 6
Set Output De-emphasis to "6"
default description
Restore description to its default state
description LINE
Set port name
default duplex
Adjust port duplex setting
duplex full
Set to full duplex
duplex half
Set to half duplex
echo
Display text for scripting
echo LINE
Display text for scripting
default egress-tag-action
Restore egress-tag-action to its default state
egress-tag-action add
Add outer VLAN tag to egress frames; define
VLAN id and priority
egress-tag-action retain
(no description yet)
