mru SWG 100 SYNGAS, User Manual

Page: 94 / 129

USER MANUAL SWG
Page 94 of 129
Position 2 and 3: Dust- and particle filter (#65533 and #66088)
Required materials : Dust- and particle filter (#65533 and #66088) contained in the
service set.
Required tools:
needle-nose pliers.
Exchange interval:
Exchange necessary, if the filter gets dark or black.
Steps:
Pull the viton-tubes from the filter unit with the hand. If it is necessary, pliers can be
used to solve the tubes from the filter unit.
Remove the exhausted filter unit from the clip.
Plug the viton tubes on the filter unit. Push the filter unit on the clip.
Position 4: PTFE Filter (#51513)
Required materials: PTFE filter (#51513) contained in the service set.
Required tools: needle-nose pliers.
Exchange interval: Exchange necessary, if gas flow is to low.
Steps:
Pull the exhausted filter-unit from the viton
tube and exchange it with a new one. If it
necessary, the tube can be solved from the
tube with a needle-nose pliers.
Position 6: Filter mats (#60320)
Required materials: 2x filter mats (#60320) contained in the service-set.
Exchange interval:
Exchange necessary, if filter revolution is reduced.
Remove the
exhausted filter
unit.
Install a new filter
unit.