mru SWG 100 SYNGAS, User Manual

Page: 37 / 129

USER MANUAL SWG
Page 37 of 129
Software-settings
•
Open the menu: E
XTRAS
/A
NALOG OUTPUT CONFIGURATION
(1).
•
The overview screen appears. This menu shows, how much
analog-outputs are available and how the analog outputs are
occupied.
•
At the overview screen all analog-outputs are listed. The
amount of the analog-outputs is dependent from the amount
of the installed IO-modules. Every IO module has 4 analog-
outputs. If two IO modules are installed, the entire amount of
analog-outputs is eight. At the list, the user finds the
information which analog signal is carry out at which analog-
output channel. The follow list-notation can be found
(example):
Reference:
1. The number of the IO module. 1 means, first IO module.
2. The value of the analog-output. 3 means, the third analog-output.
3. The sample point, from where the signal comes. SP1 means, the first sample
point.
4. The signal-name. CH4 means, that this analog-output transfers CH4 signal.
This example means: At the third channel of the first IO module, the CH4 signal
from the first sample point will be transferred.
At the sketch below, the menu-screen and the analog-outputs at the first, of two
IO modules are shown.
4
3
2
1