mru SWG 100 SYNGAS, User Manual

Page: 38 / 129

USER MANUAL SWG
Page 38 of 129
•
List of the installed analog output ports (1): At this list the operator can
select, which analog-output should be configured. To select an analog-
output, move the up/down arrow keys.
•
Details (2):
Here the operator can open the configuration screen for the
selected output port. To open the details-menu, push
F1
or
OK
.
•
Auto configuration (3): If the operator pushes this key ( F2 ) the output
pins would be configured by default values.
•
Test (4):
The test-menu is for testing the analog outputs. To open the test-
menu, push
F3
or
OK
.
The navigation inside the menu taken place with the
up/down
arrow keys. With
the OK key, the analog-output can be edited:
The settings for an analog-
menu. See the screenshot below.
Reference:
1 Section (1): Shows the operator, which analog-output will be changed.
2
Sample point (2):
The operator can select the sample point. This means,
that the analog-output signal from the choose sample point will be
transmitted to the process control system.
1
2
3
4
5
6 7 8