mru SWG 100 SYNGAS, User Manual

Page: 43 / 129

USER MANUAL SWG
Page 43 of 129
Software-side
•
Open the menu:
E
XTRAS
/A
NALOG OUTPUT CONFIGURATION
(1).
•
The overview screen appears. This menu shows, how much alarm-outputs
are available and how the alarm outputs are occupied.
At the overview screen all alarm-outputs are listed. The amount of the
alarm-outputs is dependent from the amount of the installed IO-
modules. Every IO module has 2 alarm-outputs. If two IO modules are
installed, the entire amount of alarm-outputs is four. At the list, the user
finds the information which alarm signal is carry out at which alarm-
output channel. The follow list-notation can be found (example):
Reference:
1. The number of the IO module. 1 means, first IO module.
2. The value of the alarm-output. 2 means, the second alarm-output.
3. The sample point, from where the signal come. SP1 means, the first sample
point.
4. The signal-name. CH4 means, that this alarm-output monitors the CH4
channel.
This example means: At the second channel of the first IO module, the CH4
signal from the first sample point will be transferred.
At the sketch below, the menu-screen and the analog-outputs at the first, of two
IO modules are shown.
•
List of the installed alarmoutput ports (1): At this list the operator can
select, which alarm output should be configured.
2 3 4
1
1
2
3
4