manualshive.com logo in svg

MR ETOS IM, Operating Instructions Manual

Share
Download
MR ETOS IM Operating Instructions Manual Download Page 255

7 Operation

Maschinenfabrik Reinhausen GmbH 2019

255

5163667/06 EN

ETOS

®

 IM

7.22.3 Displaying event memory

Past events are stored in the event memory. The following information is dis-
played:

Column Description

#

Consecutive number of events

No.

Event number for clear identification

Event category:

▪ Error (red)

▪ Warning (yellow)

▪ Info (gray)

Event

Event text

Time

Date and time of event (DD.MM.YYYY, HH:MM:SS/ms)

Event coming/going:

 Event coming

 Event going

Table 68: Event memory

To call up the event memory, proceed as follows:

1. Go to 

Events

.

2. Press the 

Log

 button.

Figure 195: Event memory

Filtering events

To adjust the display, you can define a filter. To do so, proceed as follows:

1. Press the 

Filter

 button.

2. Enter the desired time period.

Summary of Contents for ETOS IM





























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands