manualshive.com logo in svg

MR ETOS IM, Operating Instructions Manual

Share
Download
MR ETOS IM Operating Instructions Manual Download Page 178

7 Operation

Maschinenfabrik Reinhausen GmbH 2019

178

5163667/06 EN

ETOS

®

 IM

7.11 On-load tap-changer monitoring

7.11.1 Changing tap position designation (optional)

This function allows you edit the designation of the tap position. The desig-
nations are displayed on the main screen when each of the tap positions is
active and are used for the control system.

To edit the designations of the respective tap positions, proceed as follows:

1. Go to 

Settings > Tap position table

.

2. Select the desired tap position.

Figure 130: Tap position table

3. Enter designation for tap position and for control system.

Figure 131: Entering tap position

4. Click on the 

Accept

 button.

Summary of Contents for ETOS IM





























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands