EDS-405A/408A Series User’s Manual
Featured Functions
3-54
Email Address
Setting
Description
Factory Default
Max. 30
Characters
You can set up to 4 email addresses to
receive warning emails from the EDS.
None
Send Test Email
After finishing with the email settings, you should first press the
Activate
button to activate those
settings, and then press the
Send Test Email
button to verify that the settings are correct.
NOTE
Auto warning e-mail messages will be sent through an authentication protected SMTP server that
supports the CRAM-MD5, LOGIN, and PAIN methods of SASL (Simple Authentication and
Security Layer) authentication mechanism.
We strongly recommend not entering your Account Name and Account Password if auto warning
e-mail messages can be delivered without authentication mechanism.
Configuring Relay Warning
The Auto Relay Warning function uses relay output to alert the user when certain user-configured
events take place. There are two basic steps required to set up the Relay Warning function:
1.
Configuring Relay Event Types
Select the desired
Event types
from the Console or Web Browser Event type page (a
description of each event type is given later in the
Relay Warning Events setting
subsection).
2.
Activate your settings
After configuring, you will need to activate your EDS’s Relay Event Types.
Relay Warning Events Settings
NOTE: The user interface for the EDS-408A shows 8 ports.
