Motorola Malux MTM5400 Series Feature User Manual Download

Page: 21 / 133

2.4 Display

Table 2-3

Controls and Indicators (cont'd.)

Annotation

Description

EXTERNAL ALARM key

Press to activate One-Touch Button feature (activates/deactivates the horn and lights by
default).

SPEAKER CONTROL key

Press to activate One-Touch Button feature (turns the speaker on/off by default).

BACKLIGHT key

Press to activate One-Touch Button feature (dims the backlight by default).

PTT (Push-To-Talk)

• Press and hold to talk in simplex calls or to initiate a group call, release it to listen.

• Press to send status and text messages.

MICROPHONE

• Before using your radio for the first time, remove the plastic lens protector from the

display.

• It is recommended to turn off the terminal before connecting any of the accessories.

2.4 Display

This section presents the radio's home screen elements.

Table 2-4

Display

Annotation

Description

Status icon area

Text display area

SOFT key area

MENU/Context sensitive icon

2-5

Summary of Contents for Malux MTM5400 Series





































































































































Search results

Summary of Contents for Malux MTM5400 Series

Reviews:

Related manuals for Malux MTM5400 Series

Brands by name

Popular brands

Motorola Malux MTM5400 Series, Feature User Manual

Search results

Summary of Contents for Malux MTM5400 Series

Reviews:

Related manuals for Malux MTM5400 Series

Brands by name

Popular brands