Motorola Malux MTM5400 Series Feature User Manual Download

Page: 86 / 133

Feature User Guide

5.7.6.10 Setting Periodic Alert

Procedure Steps

From the home screen, press MENU key.

Select

Setup → Tones → Periodic Alert

Select one of the following:

•

Alert

— Activates/deactivates periodic tone.

•

Period

— Indicates the time between each periodic tone.

5.7.6.11 D-PTT Tones

This menu item contains the settings for the Double PTT feature.

This feature needs to be enabled by your service provider.

5.7.6.12 Setting D-PTT Tones

Procedure Steps

From the home screen, press MENU key.

Select

Setup → Tones → D-PTT Tones

Select one of the following:

•

D-PTT Mode

— Activates/deactivates D-PTT tone.

•

Tone Style

— Indicates have many times the D-PTT tone is played.

5.7.7 Display

This menu item allows you to adjust your radio display settings.

Display

Setting Time and Date on the Display

5.7.7.1 Setting Text Size

When and where to use:

This feature enlarge the text on the display so you can see the interface in the environment

with the low visibility.

5-28

Summary of Contents for Malux MTM5400 Series





































































































































Search results

Summary of Contents for Malux MTM5400 Series

Reviews:

Related manuals for Malux MTM5400 Series

Brands by name

Popular brands

Motorola Malux MTM5400 Series, Feature User Manual

Search results

Summary of Contents for Malux MTM5400 Series

Reviews:

Related manuals for Malux MTM5400 Series

Brands by name

Popular brands