Motorola Malux MTM5400 Series Feature User Manual Download

Page: 88 / 133

Feature User Guide

Procedure Steps

From the home screen, press MENU key.

Select

Setup → Display → Wallpaper

Select one of the following:

•

— To activate this feature.

•

Off

— To deactivate this feature.

5.7.8 Time and Date

This sub-menu controls the displayed time and date on the home screen.

If the Home Display Text Message feature is enabled, the time and date cannot be displayed.

Infrastructure synchronizes the time and date. When not within the infrastructure signal range you can
set the values manually.

5.7.8.1 Setting Time and Date on the Display

Procedure Steps

From the home screen, press MENU key.

Select

Setup → Time & Date → Display

Select one of the following:

•

Time & Date

— Your radio displays time and date.

•

Time Only

— Your radio displays time only.

Format Date

sub-menu is disabled.

•

Date Only

— Your radio displays date only.

Format Time

sub-menu is disabled.

•

Off

— Your radio does not display time nor date.

Format

menu is disabled.

Display

5.7.8.2 Setting Time Format

Prerequisites:

If MENU

→ Setup → Time & Date → Display

is set to

Time & Date

Time Only

5-30

Summary of Contents for Malux MTM5400 Series





































































































































Search results

Summary of Contents for Malux MTM5400 Series

Reviews:

Related manuals for Malux MTM5400 Series

Brands by name

Popular brands

Motorola Malux MTM5400 Series, Feature User Manual

Search results

Summary of Contents for Malux MTM5400 Series

Reviews:

Related manuals for Malux MTM5400 Series

Brands by name

Popular brands