Motorola Malux MTM5400 Series Feature User Manual Download

Page: 117 / 133

6.17.1 New WAP Messages

A WAP push message is an encoded message including a link to a WAP address. On receiving a WAP push,
a WAP enabled radio automatically gives the option to access the WAP content. The implemented WAP push is
compliant to WAP 2.0 standard.

The radio supports WAP 2.0 through a proxy only. Proxy-less connections are not supported

This is a selling feature.

WAP

WAP Box

6.17.1 New WAP Messages

Types of the WAP Messages and their priorities:

Your service provider sets the priority of the message.

• Push Message

– High — animation and the icon (blinking) are displayed with the New WAP Message tone.

– Medium — animation and the icon are displayed with the New WAP Message tone.

– Low — icon is displayed with the New WAP Message tone.

– Delete — available only if you are is in WAP Box, the text

WAP Message deleted remotely

is displayed,

otherwise there is no indication.

Animation is not displayed if you are in a call, or in Emergency Mode, or in Call Out, or in message
editor, or PIN lock state, or switching to DMO.

• Load Push Message

– High — browser opens to the user with the New WAP Message tone.

– Low — the icon is displayed with the New WAP Message tone.

Browser does not open if you are in a call, or in Emergency Mode, or in Call Out, or in message editor, or
PIN lock state, or switching to DMO.

6.17.2 Viewing a WAP Message

Procedure Steps

From the home screen, press MENU key.

6-11

Summary of Contents for Malux MTM5400 Series





































































































































Search results

Summary of Contents for Malux MTM5400 Series

Reviews:

Related manuals for Malux MTM5400 Series

Brands by name

Popular brands

Motorola Malux MTM5400 Series, Feature User Manual

Search results

Summary of Contents for Malux MTM5400 Series

Reviews:

Related manuals for Malux MTM5400 Series

Brands by name

Popular brands