Motorola LEX L10ig User Manual Download Page 37

Page: 37 / 194

Return to Process

Setting Up

on page 32

2.3.7

Installing Battery

When and where to use:

Perform this procedure to install a battery.

Procedure:

Remove the battery from the packaging.

Insert the battery into the battery compartment with the battery contacts facing the bottom of the
device.

Figure 7: Installing the Battery

Press the top of battery into place.

Place the battery cover into place.

Ensure that all battery cover snaps are fully engaged.

Return to Process

Setting Up

on page 32

2.3.8

Removing Battery

When and where to use:

Perform this procedure to remove the battery.

Procedure:

Slide a finger nail (preferably a thumb nail) into the Battery Cover removal slot and gently pull
the Battery Cover away from the device.

Remove the battery cover.

MN003477A01-A

Chapter 2: Getting Started

Send Feedback

Summary of Contents for LEX L10ig


































































































































































































Search results

Summary of Contents for LEX L10ig

Reviews:

Related manuals for LEX L10ig

Brands by name

Popular brands

Motorola LEX L10ig, User Manual

Search results

Summary of Contents for LEX L10ig

Reviews:

Related manuals for LEX L10ig

Brands by name

Popular brands