Motorola LEX L10ig User Manual Download Page 187

Page: 187 / 194

Figure 73: Import/Export Contacts Popup

Select

Import from .vcf file

In the popup window, tap

Allow

In the folder that opens, select the

.vcf

file with contacts.

Return to Process

Back Up or Restore Data on Your Device

on page 183

13.9

Resetting the LEX Device

Use this procedure to reset the LEX device.

When and where to use:

If the device does not operate properly, perform the following procedure.

Procedure:

Power off and on the device and verify if the problem is gone.

The device restarts. If the problem remains, perform Step 2.

CAUTION:

To avoid erasing important data from your device, do not press any of the

buttons during power up.

Press the

Power

button and hold it for 10 seconds.

The device restarts.

Remove the battery, reinsert it, and verify if the problem is gone.

The device restarts. If the problem remains, contact technical support.

Return to Process

Maintenance and Troubleshooting

on page 175

MN003477A01-A

Chapter 13: Maintenance and Troubleshooting

Send Feedback

187

Summary of Contents for LEX L10ig


































































































































































































Search results

Summary of Contents for LEX L10ig

Reviews:

Related manuals for LEX L10ig

Brands by name

Popular brands

Motorola LEX L10ig, User Manual

Search results

Summary of Contents for LEX L10ig

Reviews:

Related manuals for LEX L10ig

Brands by name

Popular brands