Motorola LEX L10ig, User Manual

Page: 96 / 194

NOTICE:
Use a TSB-121 compliant cable (provided by the TTY manufacturer) to connect the TTY
device to the LEX device.
Set the device volume to a middle level setting for proper operation. If you experience a
high number of incorrect characters, adjust the volume as needed to minimize the error
rate.
For optimal performance, the device should be at least 30 cm (12 inches) from the TTY
device. Placing the device too close to the TTY device may cause high error rates.
+ TTY Off (default) — TTY is off.
+ TTY Full — Transmit and receive TTY characters.
+ TTY HCO — Transmit TTY characters but receive by listening to earpiece.
+ TTY VCO — Receive TTY characters but transmit by speaking into microphone.
• Additional Call Settings
- Ringtone Settings — When using a Bluetooth headset, select the path that the ring is heard.
Options: Bluetooth or Speaker and Bluetooth (default).
NOTICE: Bluetooth headset connection is required to set this option.
- DTMF tones — Set the length of the DTMF tones . Available options are: Normal or Long .
- CDMA Call Settings :
+ Voice privacy — Enable enhanced privacy mode.
Return to Process
Calling on page 91
MN003477A01-A
Chapter 5: Calling
96 Send Feedback