Motorola LEX L10ig, User Manual

Page: 163 / 194

• Install certificates — Allows installing Wi-Fi certificates.
• Wi-Fi Direct — Allows devices to connect without requiring a wireless access point.
• MAC address — Displays the Media Access Control (MAC) address of the device when connecting
to Wi-Fi networks.
• IP address — Displays the IP address of the device when connecting to Wi-Fi networks.
Return to Process
Wireless Local Area Networks on page 158
11.2.4
WLAN Configuration
Use the WLAN Configuration settings to configure additional WLAN settings.
From the Wi-Fi screen, tap → Advanced to view the settings. The following two settings are used to
configure WLAN:
• Network notification — Adjust the slidebar to receive notification whenever a public network is
available.
• Wi-Fi frequency band
- Auto (2.4GHz and 5GHz) —Use both the 2.4 GHz and 5 GHz bands (default).
- 5GHz Only — Use only the 5 GHz band.
- 2.4GHz Only —Use only the 2.4 GHz band.
• Keep Wi-Fi on during sleep
- Always — Wi-Fi is always enabled even in sleep mode.
- Only when plugged in — Wi-Fi is enabled only when the device is plugged in. If the device is
not plugged in, the device will not enter the sleep mode.
- Never (increases data usage) — Wi-Fi is never disabled.
• Install certificates — Allows you to install cerificates for Wi-Fi network access.
• Wi-Fi direct — The device may serve as an access-point and other Wi-Fi-enabled devices may
directly connect to it.
Return to Process
Wireless Local Area Networks on page 158
11.2.5
Modifying Wi-Fi Networks
The user may modify the default Wi-Fi network settings, for example set a new password or modify
security settings.
Procedure:
1 Tap → → Wi-Fi .
2 From the list of available networks, tap and hold the network you want to modify.
3 Tap Modify network .
4 Modify the network settings and tap Save .
MN003477A01-A
Chapter 11: Wireless
Send Feedback 163