Motorola LEX L10ig User Manual Download Page 139

Page: 139 / 194

Return to Process

on page 134

10.2.5

Video Settings

Video settings allow the user to modify video features, such as video quality, color effect, white
balance, and many more.

When in

Video

mode, video settings are displayed on screen.

Tap

to display the video settings options.

Figure 60: Video Settings

The available video settings are (from left icon to right icon):

• Two screens of

More Options

. Settings for each option depend on the selected option. You can

select an item from a menu or you select an option by clicking it.

NOTICE:

These options are similar to the video options seen on most cameras. Set the

video options accordingly.

• Switch from front to rear video or from rear to front video.

Return to Process

Camera

on page 134

10.3

Gallery

The

Gallery

is used to manage your photos and videos.

NOTICE:

The device supports the following image formats: JPEG, GIF, PNG, and BMP.

Use the

Gallery

to:

• View photos

• Play videos

• Perform basic editing of photos

• Set photos as wallpaper

• Set photos as a contact photo

• Share photos and videos

To open the

Gallery

application, tap

→

The

Gallery

presents all photos and videos stored on the microSD card and internal memory.

MN003477A01-A

Chapter 10: Applications

Send Feedback

139

Summary of Contents for LEX L10ig


































































































































































































Search results

Summary of Contents for LEX L10ig

Reviews:

Related manuals for LEX L10ig

Brands by name

Popular brands

Motorola LEX L10ig, User Manual

Search results

Summary of Contents for LEX L10ig

Reviews:

Related manuals for LEX L10ig

Brands by name

Popular brands