Motorola LEX L10ig, User Manual

Page: 32 / 194

Item Function
Battery Cover Removal Slot Assists in battery cover removal to provide ac-
cess to the battery, SIM, CRYPTR, and mi-
croSD card holders.
microUSB Port Provides USB client and host communications.
Rear Camera and Flash Takes photos and video, and provides flash illu-
mination for the camera.
Return to Process
Getting Started on page 29
2.2
Unpacking
Carefully remove all protective material from the LEX series device and save the shipping container for
later storage and shipping.
Verify that the following were received:
• LEX device
• Battery Cover
• 2280 mAh Lithium-ion battery
• Charger
• USB Cable
• Regulatory Guide
• Quick Start Guide
Inspect the equipment for damage. If any equipment is missing or damaged, contact the Motorola
Solutions Support Center immediately.
Return to Process
Getting Started on page 29
2.3
Setting Up
The initial setup of the LEX device requires that the battery and any cards be installed.
NOTICE: The device may be delivered to you with battery, SIM card, microSD card and/or
CRYPTR cards already installed, activated, and ready for use. In this case, ignore steps 2
through 6 of the following section if they were already performed.
Before using for the first time, perform the following:
1 Remove the screen protection film from the screen, see Removing Screen Protective Film on page
33 .
2 Install the public and/or Private SIM cards, see Installing Public and Private SIM Cards on page
35 .
3 Install the microSD or CRYPTR card (optional), see Installing a microSD or CRYPTR micro
Encryption Card on page 34 .
4 Install the battery, see Installing Battery on page 37 .
5 Install the battery cover.
MN003477A01-A
Chapter 2: Getting Started
32 Send Feedback