Motorola LEX L10ig, User Manual

Page: 34 / 194

Figure 4: Removing the Battery Cover
Return to Process
Setting Up on page 32
2.3.3
Installing a microSD or CRYPTR micro Encryption Card
The LEX device card holder can support either a microSD card or a CRYPTR micro encryption
card.The microSD card is a removable flash memory used for storing media on the device. The device
can support microSD cards with up to 64GB memory space. The CRYPTR micro encryption card is
used for voice encryption in features such as data and phone over Virtual Private Network (VPN) and
Push-to-Talk (PTT) communication. The CRYPTR micro provides FIPS 140-2 Level 3 storage for
credentials/keys for Data At Rest (DAR) encryption and MVPN. The slot of the card is located under
the battery.
When and where to use:
NOTICE: For powering up devices with CRYPTR micro cards, device technicians should follow
instructions in LEX L10i/L10ig Service Provisioning Guide .
NOTICE: The LEX device may be delivered to you with battery, SIM card, and microSD or
CRYPTR card already installed, activated, and ready for use. In case a CRYPTR is pre-
installed in the device, you must change the CRYPTR password provided by your technical
support. This is not a password to access the device but a password to protect Motorola
Solutions secure applications. The CRYPTR password is required whenever the device is
restarted.
Procedure:
1 Slide the card into the card holder slot with contacts facing down.
2 Push the card into the slot until it is fully seated and locked into place.
MN003477A01-A
Chapter 2: Getting Started
34 Send Feedback