Moog G305-170, Operation Manual

Page: 56 / 90

56
Commissioning
MSD Single-Axis System Operation Manual AC-AC Servo Drive
ID no.: CA65642-001 06/2018
moog
NOTES:
y
During the flashing phase the save procedure can still be aborted by
pressing any button, without applying the value set. Otherwise the new
value will be saved after five seconds.
y
A modified IP address will not be applied without restarting the control
electronics.
5.4.5 Field bus address menu (Fb)
The functions available on this menu item depend on the device's communication
option. For detailed information refer to the relevant specification.
Menu level
Parameter
Value
range
Meaning Explanation
1 2
Fb
Ad - 00..xx
or
- -
Field bus address Setting for field bus address
(only if field bus option used), otherwise
indication "- -"
(The maximum value that can be programmed
depends on the option)
Po - 0..3
or
- -
Transmit power Setting for fibre-optic power output
(only with SERCOS II option),
otherwise indication "- -"
Table 5.8 Field bus address menu
Example configuration of the field bus address
In this example the field bus address is changed from 1 to 23.
Tx
Tx
back
back
T2
T2
T1 T2
T1 T2
T1 T2
back
accept
>5 s >5 s
<5 s
<5 s
T1 T2
T1 T2 T1 T2
Value NOT
saved
Value
saved
T1 T2
T1
several actuations
of buttonTx (X = 1, 2)
until the desired menu
appears in the display
single actuation
of button Tx (X = 1, 2)
simultaneous actuation
of both buttons T1 and T2
Actuation of
any button
Figure 5.4 Example configuration of the field bus address