manualshive.com logo in svg

Molecular Devices QPix 450, User Manual

The Molecular Devices QPix 450 is a cutting-edge laboratory instrument that automates the imaging and picking of microbial colonies. For detailed instructions on how to optimize this device's capabilities, you can access the comprehensive user manual for free download from our website. Discover the full potential of your QPix 450 today!

Share
Download
background image

QPix 450 or QPix 460 Colony Picking System User Guide

136

5031498 G

3. For a fluorescent image, adjust the Intensity Measure as shown in the histogram. This

option is available only for instruments with a fluorescence imaging module.

Mean Intensity is the average fluorescence of the detected colony (the fluorescence of
all the pixels within the colony perimeter divided by the number of pixels within the
colony perimeter).
Median Intensity is the middle fluorescence value of all the pixels within the detected
colony perimeter.
Geometric Intensity is the geometric intensity of the detect colony or the fluorescence
of all the pixels within the colony perimeter.
Centre Mean Intensity is the average fluorescence value of the middle 9 pixels within
the detected colony perimeter.

Select Greater than, Less than, or Between and then enter a value to define the
fluorescence intensity threshold. For Between, enter two values to define the range.

4. Change the pickable property of individual objects.

To define an object as pickable, right click the object and select Pick Item to display the
object in green.
To define an object as unpickable, right click the object and select Discard Item to
display the object in blue.

5. In the Limit Colonies field, enter the maximum number of colonies to pick from each region.

If a limit was previously set for the maximum number of colonies in the Destination/Source
Options window, the Limit Colonies option is not available in the Feature Selection window.
See

Setting Source Receptacle Options on page 64

.

The Total Feature Count field displays the total number of pickable objects.

6. Select the Feature Counts tab to view the number of found features in the regions of the

source receptacle configured in columns.

The Well column identifies the region of the source receptacle.
The Found column gives the number of colonies found in that region.
The Pickable column gives the number of pickable colonies in that region, based on
the selection criteria.
The Picking column gives the number of colonies that are to be picked in that region,
based on the selection criteria

To save the data in .csv format, right-click and then click Export.

Summary of Contents for QPix 450


































































































































































































































































Reviews:

No comments

Related manuals for QPix 450

KaVo K4 Operating Instructions Manual preview
K4
Brand: KaVo Pages: 13
vc999 K3 Operating Instruction preview
K3
Brand: vc999 Pages: 52
EarthQuake 5040 Operator'S Manual preview
5040
Brand: EarthQuake Pages: 28
TAIKO Audio Extreme Manual preview
Extreme
Brand: TAIKO Audio Pages: 24
Abbott CentriMag Quick Reference Manual preview
CentriMag
Brand: Abbott Pages: 2
Abbott FreeStyle Libre Software Update preview
FreeStyle Libre
Brand: Abbott Pages: 3
abc PHASER Operation And Maintenance Manual preview
PHASER
Brand: abc Pages: 8
Gardol GLVE 1400-34 Original Operating Instructions preview
GLVE 1400-34
Brand: Gardol Pages: 260
York Fitness 60091 Owner'S Manual preview
60091
Brand: York Fitness Pages: 20
Harman Martin ERA 800 Performance Safety And Installation Manual preview
Martin ERA 800 Performance
Brand: Harman Pages: 32
Harman Martin ERA 600 Performance Safety And Installation Manual preview
Martin ERA 600 Performance
Brand: Harman Pages: 32
Sabre PA-100 Quick Start Manual preview
PA-100
Brand: Sabre Pages: 2
iFIT TT200 Patient User Manual preview
TT200
Brand: iFIT Pages: 11
Parkside 304002 Quick Start Manual preview
304002
Brand: Parkside Pages: 2
Park House Healthcare Tudor User Manual preview
Tudor
Brand: Park House Healthcare Pages: 12
Xylem McDonnell & Miller PSE-800-M Application, Installation, Operation, And Maintenance Manual preview
McDonnell & Miller PSE-800-M
Brand: Xylem Pages: 20
Agilent Technologies Intuvo 9000 Installation And First Startup preview
Intuvo 9000
Brand: Agilent Technologies Pages: 114
Kamar LW0034 User Manual preview
LW0034
Brand: Kamar Pages: 2

Brands by name

Popular brands

Load more brands