Mold-Masters Fusion G2, User Manual

Page: 167 / 192

Section 12 - Troubleshooting
12.1 Introduction
WARNING
Ensure that you have fully read “Section 3 - Safety” before troubleshooting
any issues with your FUSION SERIES
®
G2 system.
WARNING - HOT SURFACES
Extreme heat. Avoid contact with heated surfaces. To avoid serious burns
wear safety clothing consisting of a protective heat resistant coat and heat-
resistant gloves. Use adequate ventilation for fumes. Failure to do so can
result in a serious injury.
WARNING - LOCKOUT / TAGOUT
Make sure the machine has been locked out and tagged out in accordance
to the machine’s documented procedures. Failure to do so may lead to
serious injury or death.
This troubleshooting information assumes that the Hot Runner has been
operational.
Basic rules for troubleshooting are:
•
Define the problem; what is seen is only a symptom of the underlying
problem.
• Develop a method to isolate the problem.
• Test one item at a time to verify results.
•
Monitor the final solution to verify that the problem has been solved.
Repeat occurrences of the same symptom may indicate other problems.
• Document the solution so that a repeat occurrence can be solved quickly.
• Consult other resources to augment the troubleshooting information in
this manual.
• Use your resin supplier as one of the best resources available.
12-1
© 2020 Mold-Masters (2007) Limited. All Rights Reserved.
TROUBLESHOOTING
FSG2 User Manual