Mold-Masters Fusion G2, User Manual

Page: 133 / 192

flange.
4. Align the cooling plate on top of the spacers.
5. Install two assembly screws to hold these parts together for steps 5 to 13.
6. Insert the top of the spacers into the counterbores on the bottom of the
cooling plate.
7. Hold the motor rod to prevent rotation.
8. Install the valve pin holder assembly onto the motor. Torque to 8 to 10 Nm
[6 to 7 ft-lbs]. See Figure 6-8.
1
2
3
1. Motor rod
2. Valve pin holder (top)
3. Valve pin holder (bottom)
4. Valve pin
4
Figure 6-8 Valve pin holder components
9. Place the motor locating spigot and valve pin assembly onto the cooling
plate.
NOTE
Ensure that the motor shaft is aligned with the cooling plate bore.
Motor locating
spigot
Assembly and Installation - continued
6-9
© 2020 Mold-Masters (2007) Limited. All Rights Reserved.
SEVG PLUS ACTUATOR
FSG2 User Manual