manualshive.com logo in svg

Moeller S40-AM-TL, Manual

Share
Download
Moeller S40-AM-TL Manual Download Page 18

Assigning data array 
parameters

15

10/00 AWB27-1301-GB

Basic function block for the secondary station:

Within a telecontrol line (primary station and all secondary 
stations) all instances of “fixed_length” must be identical. 
We recommend that you start by setting the function block 
for the secondary station and then use this function block for 
all the outstations in the same line.

Please note that all the stations in a telecontrol line must 
have the same data array size.

Universal function blocks

These data arrays are already set up in the variable 
declaration of the universal function blocks. They may have 
to be adjusted, however, if the default parameters are not 
exactly as required.

Universal function blocks have the following data array basic 
settings and range limits:

VAR_INPUT

fixed_length : USINT(1..20) ;

User data length for fixed length 
frames

tra_dat: ARRAY[0..19] OF BYTE ;

Send data array (data array length)

END_VAR

VAR_OUTPUT

rec_dat: ARRAY[0..19] OF BYTE ;

Receive data array (data array 
length)

END_VAR

Summary of Contents for S40-AM-TL


















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands