Mobatime DTS 4801.masterclock, Instruction Manual

Page: 76 / 120

© MOBATIME 76 / 120 800652.11
Save the current configuration via USB-Stick:
The whole procedure can be analogously done with an USB stick. The copy procedure
to the USB stick can be started on DTS 480x by selecting the menu '3. Maintenance'

’3. Backup configuration and log to USB’ and press ENTER. All files (including
program and telegram files) will be copied into the root directory of the USB stick.
Copy configuration to an other DTS 480x:
In order to copy the entire configuration or elements of it from a DTS device to another,
the according assistant in MOBA-NMS can be used. For this, select the source device
(from which the configuration shall be transferred) and start the assistant in the menu
‘Edit‘
 ‘Transfer configuration…‘. It will lead you through the individual steps.
Without MOBA-NMS, perform the procedure explained in chapter 7.3 resp. 7.5 .
Important:
When copying the configuration from one DTS 480x to an other, the IP
address may have to be changed after the download by serial connection
7.10 Copying Telegram or Program files to the DTS 480x.masterclock
Analogously to the previously described procedures telegram and program files can be
copied via FTP or USB stick to the DTS 480x.
The copy procedure can be started on the DTS 480x by selecting the menu
'3. Maintenance'
 ’8. Copy telegram- and program-files' and press ENTER.
Afterwards, select again in the menu “6.5.7 Serial telegrams” and reload.
The files are stored in the directory
/var/local/dts
and can be deleted or copied via
FTP.
In addition to the program files (*.prg),
*.mbs3
– files (SwitchEditor) can also be copied
to the DTS 480x and also be read again later from there.
Special case USB stick:
If the DTS recognizes the insertion of an USB stick, it is shown on the display. By
pressing the red button the copy procedure can be released (analogously to the above
described procedure). The button has to be pressed until the copy procedure is started.
Management with MOBA-NMS:
With MOBA-NMS, the files do not need to be copied manually via FTP or USB stick,
since this is already integrated in the MOBA-NMS operation. At every file selection, the
‘Change…‘ link can be clicked. This opens a file dialog which shows all files and allows
new files to be loaded onto the device or existing ones to be deleted.
Example of a program file choice:
Important:
After the file copy procedure, the output of the telegram files and the
treatment of the switch programs are re-started (take over of the files).
Important:
The
file name
is limited to
8 characters
before the dot, e.g.
IF482Std.tel.
Link for opening the file
dialog for editing the file list.