Mobatime DTS 4801.masterclock, Instruction Manual

Page: 31 / 120

© MOBATIME 31 / 120 800652.11
6.5.5 DCF active code line
DCF active code line with display of the line number:
1. Select line type: 0 = MOBALine, 1 = Impulse line, 2 = DCF active code line
2. Select line function: Line switched off, line switched on
3. Select line mode: See the diagrams on the next page.
4. Select time zone (see chapter “6.5.28 Time zone selection“)
5. Select maximum current (0-1000mA) on the line. The line will be switched off as
long as the overcurrent is connected and restarted only on the next minute.
DTS 4802: The maximum current is divided between both lines, i.e. it can always
only be the remainder at the most, that can be set as maximum current.
Important:
Changes can only be undertaken when the clock line is switched off!