MK BML-150, Operating Instructions Manual

Page: 42 / 84

41
The bread
maker will
not start
the START
button is
pressed.
The Timer
mode does
not work.
Smoke
appears
from the
ventilation
port.
The bread
dough
cannot be
kneaded.
The blade
got stuck
inside the
bread as it
was baking.
The bread
fails to bake
according
to the Timer
mode.
The unit
stops
running
partway
through the
baking cycle.
Reference
pages
Is the machine plugged in ?
● 11
Is the interior of bread maker too hot ?（E：01 on the display）
● 41
Did you select a menu option?
●
12
Have you set the Timer correctly?
●
10
Did you select one of the following menu options ？
「Sweet」
「Rice bread(gluten free)」「Stollen」「Cake」 「Fresh Butter」「Jam」
「Knead+Rise(Dough)」「Rise+Bake」「Knead Rise Bake」「Natural
Leaven Leaven Rise」「Natural Leaven Rapid」「Natural Leaven Whole
Wheat」
「Natural Leaven Sweet」 「Natural Leaven Knead+Rise」 「Natural
Leaven Rise+Bake」
● 10
The ingredients have spilled on the coil?
●
12
Is the unit new?
●
12
Did you remember to insert the blade properly?
● 11
Did you insert the blade properly?
● 11
Did you use the right amount of water?
●
11
Did you set the Timer time correctly?
●
10
Did you pull out the power plug or touch the [Stop] key
accidentally?
● ●
41
Was there a power outage?
● ● 41
Problem
Check Point
▪ When the START button has been pressed
▪ When the bread maker has been started
Model BML150
Power supply 220V（50/60㎐） Timer
16hours
Power
Consumption
Heater 450W Protective Device Thermal cutoff
Motor（50/60㎐） 95/90W Power supply Cord approx1.1m
Rated Power Consumption 470W（Jam mode） Dimensions
W
25·D40·H30㎝ Weight approx 6kg
Flour Capacity/Bresd Type 400g ／ Horizontal Accessories Measuring Cup・Measuring Spoon・Leaven Cup（With lid）・Fresh Butter Lid.
▪ After baking is completed
Open the lid and take out the bread case to cool.
Allow the unit to cool. When the warning
turns off, press the START button.
Remove the dough and discard it. Restart
the bread maker from the beginning with new
ingredients.
Remove the cover to the battery
box, and replace the old lithium
battery with a new one.
Please use the unit in a location with the optimal
temperature for bread making (15℃〜 28℃ ）
from now on.
Lithium Coin Battery
Model No : CR2032
・The temperature during kneading and rising was too hot.
・The temperature after kneading was too cool.
(This can occur in cold environments.)
If any error messages other than the ones listed above should appear, please contact a
local retailer where you purchased the unit for assistance with inspection and repairs.
・This indicates that the inside of the unit got too hot (over 38℃ )
・This displays if you attempt to start another baking process
immediately after the previous one ends. It may also appear
if you attempt to use the unit after the "Knead" process is
completed.
Warning blinks on the display.
Present time appeared on
the display.
Mark of battery appeared on
the display.
・This indicates that the lithium battery has gone dead.
※ The unit can still be used even if the battery goes dead if
the power cord is plugged in.
※ If planning to use the Timer mode, make sure to set the
current time.
・There was a power interruption or failure during the
operation of the bread maker.
・The power plug may have been unplugged or the breaker
tripped partway through the baking cycle.
Before Calling for Service
Control Panel Messages
Specification
・If you have a problem with your machine, check the following hints before making a call to the store you bought it.
・Do not repair or wark on it yourself.
Care and keeps