Mitsubishi MELSEC LJ71C24, User Manual

Page: 357 / 428

App. - 28 App. - 28
APPENDIXES
Appendix 4.3.2 Operation of GX Configurator-SC
When using GX Configurator-SC to set C24 parameters, display methods such as
setting screens vary from those of GX Works2.
In this section, the screen displaying methods of GX Configurator-SC are explained.
Also, since the setting contents are the same as GX Works2, refer to Chapter 7.
When using GX Configurator-SC, configure the settings in the following screens.
Screen name Application
Flash ROM setting
Change the initial values of the C24 buffer memory
to register them to the flash ROM.
Select monitor/test module
Monitor the operating status and set values of the
C24 and test its output signals.
Auto refresh setting
Configure the setting to automatically transfer the
data in the C24 buffer memory to the CPU module
device.