Mitsubishi GX Configurator-AD, User Manual

Page: 115 / 208

5 - 26 5 - 26
MELSEC-Q
5 UTILITY PACKAGE (GX Configurator-AD)
5.7 FB Conversion of Initial Setting/Auto Refresh Setting
[Purpose of setting]
FB is generated automatically from the intelligent function module parameter
(initial setting/auto refresh setting).
[Startup procedure]
Intelligent Function Module Parameter Setting Module Selection Screen
<<FB Support Parameter>> FB conversion
[Setting screen]
[Explanation of items]
(1) Items displayed on the screen
Start I/O No.:
The start I/O No. of the information which is set up on the currently open
intelligent function module parameter is displayed.
Module model name:
The module model name of the information which is set up on the
currently open intelligent function module parameter is displayed.
Initial setting:
Set up whether to apply FB conversion to the parameter or not.
Check if you apply FB conversion to the parameter.
Auto refresh setting:
Set up whether to apply FB conversion to the parameter or not.
Check if you apply FB conversion to the parameter.
FB program name:
Set up the name of the converted FB program.
Up to six single-byte characters can be set up as an FB program name.
However, the characters and terms shown below cannot be set up as FB
program name.
Character: \, /, :, ;, *, ?, ”, <, >, |, ,
Term:
COM1 to COM9, LPT1 to LPT9, AUX, PRN, CON, NUL,
CLOCK$
In addition, I- is added for initial setting and A- is added for auto refresh
setting respectively to the top of the FB name setting to be registered in
GX Developer after FB conversion is performed.
Ex.: If the FB program name is "ABCDE, " the initial setting is "I-ABCDE"
and the auto refresh setting is "A-ABCDE. "
Title: Set up a title on a converted FB program. Up to 32 single-byte characters
can be set up as a title.
(2) Explanation of screen command buttons
Conversion FB conversion is performed for the checked columns of initial
setting and auto refresh setting.